:00:00# Officially Xerox, but 0:0:0:0:0:0 is more common00:00:01Xerox # X. Drivers Catalog ⇒ Modems ⇒ SendTek ⇒ ISDN TA (USB) Drivers Installer for ISDN TA (USB) If you don’t want to waste time on hunting after the needed driver for your PC, feel free to use a dedicated self-acting installer.
Drivers Sendtek Modems Wireless
Drivers Sendtek Modems Reviews
:NOKIA SECRET CODES:also known as Nokia Hacks.
On the main screen, type :
*#06# for checking the IMEI (International Mobile EquipmentIdentity).
*#7780# reset to factory settings.
*#67705646# This will clear the LCD display(operator logo).
*#0000# To view software version.
*#2820# Bluetooth device address.
*#746025625# Sim clock allowed status.
*#62209526# - Display the MAC address of the WLAN adapter. This is available only in the newer devices that supports WLAN like N80
#pw+1234567890+1# Shows ifsim have restrictions.
*#92702689# - takes you to a secret menu where you may find some of the informationbelow:
1. Displays Serial Number.
2. Displays the Month and Yearof Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the lastrepair - if found (0000)
5. Shows life timer of phone (time passes since last start)
*#3370# - Enhanced Full RateCodec (EFR) activation. Increase signal strength, better signal reception. It also help if u want to use GPRS and the service is not responding or too slow. Phone battery will drain faster though.
*#3370* - (EFR) deactivation. Phone will automatically restart. Increase battery life by 30% because phone receives less signal from network.
*#4720# - Half Rate Codec activation.
*#4720* - Half Rate Codec deactivation. The phone will automatically restart
If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538#
Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lockcode is: 12345
Press *#3925538# to delete the contents and code of wallet.
*#7328748263373738# resetssecurity code.
Default security code is 12345
Unlock service provider: Insertsim, turn phone on and press vol up(arrow keys) for 3seconds, should say pin code. Press C,then press * message should flash, press *again and 04*pin*pin*pin#
Change closed caller group (settings>security settings>user groups) to 00000 and ure phone will sound the message tone when you are near a radar speed trap. Setting it to 500 will cause your phone 2 set off security alarms at shop exits, great for practical jokes! (works with some of the Nokia phones.)
Press and hold '0' on the mainscreen to open wap browser.
--